200AH 6V SLA Battery , Sealed Lead Acid GEL Battery For High
1.Oxygen recombination:Sealed and maintenance-free.
2.High qulified AGM separator with Pb-Ca alloy plate.
3.Low self-discharge Flame-retardant.
4.ABS case Sealed construction and non-spillable.
5.Can be mounted on multi-position.
6.Working temperature range: -20'C~+50'C.
7.Long service life, more than 12 months storage.
8.Superior high rate discharge performance and cycle character.
9.More and faster starting power over conventional batteries
|Nominal Voltage||6V||Capacity||C10||200Ah (5.25V, at 25℃)|
|Nominal Capacity (C10)||200Ah (5.25V,at 25℃)||C5||160Ah (5.25V, at 25℃)|
|Dimension||Length 322mm||C3||150Ah (5.25V, at 25℃)|
|Width 178mm||C1||110Ah (5.1V, at 25℃)|
|Height 225.5mm||Internal Resistance||Approx. 4 mΩ (25℃)|
|Total Height 259.5mm||Max Short-duration Discharge Current||4000A(25℃)|
Feature & Advantage
1.The battery is full of power when it’s out of factory, no need to
2.no memory, no need to discharge battery use, suitable for circuit
3.by high partition, adsorption and strong.
4.there is no flowing liquid (poor liquid), does not leak acid and
5.comply with environmental requirements, ease of use.
6.the use of lead-calcium alloys, battery self-discharge is very
7.easy storage, less maintenance.
8.using ABS plastic shell and valve technology for safe use.
Alarm & Security system
Emergency Power Systerm
Fire-safety Emergency System
Banks & Financial Centre
Hospital& Testing Laboratories
Batteries should be stored in dry and clean warehouse which has
Batteries should avoid direct sunlight. Batteries should not be
near to heat
(such as radiator, the distance should more than 1m).
Batteries should avoid any toxic gas and organic solvent.
Batteries should be recharged within the storage life or before